Products

Description: Applications: Food Processor, Juicer, BlenderSpecificationsVolts. (V)Freq. (Hz)NO-LOADLOADI.P.(W)O.P. (W)EFF.(%)SPEED(rpm±10%)CURRENT(A)POWER(W)SPEED(rpm±10%)TORQUE(N.m)CURRENT(A)22050/60192000.439582000.1201.01212.499.2446.7

Vacuum Cleaner Motor Specifications: PARAMETERS/MODELS DYD1200-PD TOLERANCE VALUE RATED VOLTAGE(V) 110/220/230/240 / RATED FREQUENCY(HZ) 50/60 / RATED INPUT POWER(W) 1200 +10% -5% MAX VACUUM DEGREE(KPA) 25 -5% MAX AIR FLOW(M3/MIN) 2.4 -8% TEMPERATURE RISE(K) ≤83 / NOISE(DB) ≤90 / SPARK <2 / CLASS OF INSULATION B / MAX EFFICIENCY 35% -10% Vacuum Cleaner Motor Dimensions:

AC Brake Motor 60 ~ 100 SeriesThese motors are directly coupled to an AC power-off activated electromagnetic brake. When the power source is turned off, the motor stops instantaneously and holds the load. Specifications conforming to typical international safety standards: CE and UL.Frame sizes from 60mm to 100mm.

80ZY147-12/JW-8 DUMP TRUCK TARP MOTOR GENERAL SPECS.Voltage 12V DC Power 1.8HPRated Output Speed 40RPMRatio 90:1Replaces Aero Power Plus, Donovan 1704878, 1800716, 1801965*, 1802061, 1802066, Roll-Rite #1030/1031, US Tarp #13732, 13957, 15275, 15938, 15364, 13655; Pulltarps 517-0906/517-0909; SHUR-CO 1802066,1703823; SuperWinch 90-33319/90-33295; Tarps and Beyond 1000XT/2000XT; Buyers Products 5541095,5543095, 5543895, 5543965/5541065, TSI Apache, Tomahawk, Enforcer, Automann 577.99701, 577.99701HD, 577.99701P, 577.99702P, 577.99704P.

HYDRAULIC OIL PUMP DC MOTOR GENERAL SPECS.Voltage 12V DC ~ 48V DCNo-Load Speed  1000RPM ~ 9000RPMRated Output Speed 600RPM ~ 8000RPMRated Output Power 300W ~ 1500WInsulation Class FIP55, IP65, IP67 or IP69KCustomized shaft & front cover available upon requestApplication: AGV, Automobile cab steering, Rising-lowering lifting system, Electric forklift, Lifting pump station, Hydraulic power leveling system etc.

Fitted Motor type                   Brush/brushless/stepper/AC motorsGearbox typePlanetaryDiameter82mmBearing at outputBall bearingGear ratio1:3.71 ~1:308Ring gear materialMetal or powder metalMax. radial load(10mm from flange)400NMax. shaft axial load250NRadial play of shaft(near to flange)Not over 0.08mmAxial play of shaftNot over 0.4mmPermissible load range30.0N.m ~ 200.0N.m for S1 duty cycleMotor max. inout speedLess than 4000rpmMax. shaft press fit force500N

Motor typeAC Three-Phase MotorGearbox typeSquareDiameter90mmNominal voltage230V;380VGear ratio 1:3 ~1:180Current0.25A;0.38AFrequency50Hz/60HzNominal speed1300rpmPermissible load rangeUp to 20.0N.m for S1 duty cycleNominal power40W 

Motor typeAC Single-Phase MotorGearbox typeSpurDiameter90mmNominal voltage115V;230VGear ratio 1:3 ~1:180Current0.36A;0.40A;0.64A;0.68AFrequency50Hz/60HzNominal speed1300rpmPermissible load rangeUp to 20.0N.m for S1 duty cycleNominal power40W

Motor typeBrushless DC motorGearbox typePlanetary Pole10Phase3DiameterGearbox: 42mm; DC motor: 42mmNominal voltage12V/24V DC or customizedGear ratio 1:3.5 ~1: 294Nominal current1.2ANo load speed4000rpmNominal speed3000rpmPermissible load range2N.m ~ 15N.m for S1 duty cycleDriverExternal driverRated power21W 

Motor typeRare earth magnet DC motorOptional gearbox typePlanetary/Spur/Worm/Right Angle Diameter45mmLength 75mmNominal voltage12V/24V DC or customizedNo load current0.25A; 0.30A; No load speed2000rpm; 2500rpm; 3000rpmNorminal current0.80A; 1.70A; 2.50ANominal speed1600rpm; 2000rpm; 2400rpmNominal torque80mN.m; 130mN.m; 150mN.m; Nominal power13W; 25W; 30WIP ratingup to IP68

Motor typeNema 17 Hybrid Square Stepper MotorGearbox typePlanetary Phase2Step Angle1.8º or 0.9º or 3.6ºStep Angle Accuracy±5% (full step, no load)Gear ratio 1:3.82 ~1:346Permissible load range3N.m ~ 15N.m for S1 duty cycleTemperature Rise80℃ Max. (rated current, 2 phase on)Ambient Temperature-20℃ ~+50℃Insulation Resistance100MΩ Min., 500V DCDielectric Strength500V AC for one minuteIP ratingup to IP68 

Motor typeBrush commutated DC motor with shielding coverGearbox typePlanetary DiameterGearbox: 30mm; DC motor:28mmNominal voltage12V/24V DC or customizedGear ratio 1:3.7 ~1:596No load current150mA; 80mANominal current900mA; 500mANo load speed7300rpmNominal speed5950rpm; 6160rpmPermissible load range0.3N.m ~ 3.0N.m for S1 duty cycleNominal power6.7W; 8.2WIP ratingup to IP68